Mesa Excavation Co. provides dirt and rock hauling for excavation, remodeling, and landscaping projects in Mesa, Arizona. We remove excess soil, extract unwanted rock, and deliver fill dirt and aggregate for grade corrections. Our crews also handle site preparation and grading, land clearing, and the hauling that follows foundation, pool, and concrete work.
Mesa's caliche hardpan, decomposed granite, and heavy clay make material removal more demanding than loading loose topsoil. Caliche layers two to four feet down can slow digging and leave heavy fragments to move. We assess material density, equipment access, and disposal distance before calculating your loads. That site review helps match the trucks and loading equipment to your project.
Our tandem and tri-axle dump trucks carry up to roughly 17 tons per load, paired with track excavators and skid steers suited to the work. We coordinate loading, haul-off, and disposal so excavated material does not linger on your lot.
Mesa Excavation Co. provides dirt and rock hauling in Mesa and nearby Gilbert, Chandler, Tempe, Queen Creek, and Apache Junction.
Dirt and rock hauling covers loading, transport, and disposal or reuse of material removed from your property. That can mean foundation spoil, topsoil stripped before hardscape work, buried boulders, or landscape rock from a yard renovation.
We review what is in the pile before choosing equipment and a disposal destination. Native soil, clean aggregate, concrete rubble, asphalt, and green waste need different handling, especially when reusable material can be separated from mixed debris.
Hauling can also bring useful material onto your site. We coordinate with East Valley fill dirt and aggregate suppliers for deliveries, and assess whether existing soil can stay on the lot for backfill or cut-and-fill grading.
A hauling plan connects the excavation work to what happens next on your property. Matching material, truck access, and disposal options helps keep the site usable while avoiding unnecessary trips.
From a backyard renovation to a cleared building lot, the material leaving the site determines the hauling plan. We coordinate removal and delivery with the excavation, grading, or demolition work that produces each load.
We load and remove spoil from foundation digs, remodeling, and landscaping work. Topsoil can be stripped before hardscape installation, while usable native soil is assessed for on-site backfill before it is scheduled for disposal.
Request Estimate
Decomposed granite ledges, buried boulders, and unwanted river rock call for equipment matched to their size and weight. We extract and haul material ranging from loose aggregate to rocks too large for one person to move.
Request Estimate
Low spots and grade corrections may need material brought in as well as hauled away. We coordinate fill dirt and aggregate deliveries through East Valley suppliers, with delivery and outgoing loads arranged in the same visit when the project allows.
Request Estimate
Clearing raw acreage near Apache Junction and the Superstition Mountains can produce brush, stumps, and extensive roots. We use skid steer attachments and excavator-mounted grapples to remove vegetation, then keep green waste separate from soil and rock for disposal.
Request Estimate
Driveway, patio, shed-pad, and parking-lot removal produces heavy demolition rubble. We break and load material with hydraulic breakers, excavator-mounted hammers, or pulverizers, and separate reinforcing steel from concrete before routing qualifying loads to recycling yards.
Request Estimate
Foundation digs and pool excavation need haul-off planned alongside the dig. A typical backyard pool produces 40 to 80 cubic yards of soil depending on its footprint, and we haul that spoil during the same visit. Foundation over-excavation may also require engineered fill brought back in.
Request EstimateMaterial condition affects loading, weight, and where a truck can unload. Separating these material groups on-site helps identify what can be reused, recycled, or sent to the appropriate disposal facility.
Loose topsoil, clay, sand, and excavated caliche do not handle alike. We assess density and reuse options before calculating the outgoing loads or arranging replacement fill.
Yard renovations and desert lot clearing can leave a mix of loose aggregate and large stone. Rock size and weight guide the extraction equipment, loading method, and transport plan.
Concrete loads may include clean slab fragments, reinforcing steel, or material from an old pool shell. We separate rebar on-site so qualifying concrete can be recycled into base rock.
Removing asphalt from a driveway or commercial parking lot creates a different load from loose earth. We coordinate breaking, loading, and the disposal or recycling destination as part of the removal scope.
Palo verde, mesquite, and creosote can leave substantial root systems on a cleared lot. We separate vegetation from construction spoil and account for protected or salvageable plants before removal begins.
The right hauling setup starts with your site's material, access, and next construction phase. We review those conditions together so truck capacity, loading equipment, and disposal routes work as one plan.
We own our trucks, so hauling does not depend on securing a rented hauler. That keeps truck coordination within the crew handling your project and avoids a subcontractor markup for the hauling arrangement.
We pair track excavators and skid steers with the site conditions rather than treating every pile alike. Dense caliche, large boulders, narrow access, and loose topsoil each affect how material is extracted and loaded.
Clean rock and qualifying concrete go to regional recycling facilities wherever possible. We also review on-site soil reuse and separate rebar from concrete, helping keep reusable material out of mixed waste loads.
Hauling decisions affect access, drainage, and the next stage of construction. Mesa Excavation Co. coordinates material removal with grading and excavation so soil piles, heavy rock, and mixed debris are addressed as part of the project.
Request a Hauling EstimateHardpan and clay create heavier, more difficult loads than loose topsoil. On caliche-heavy foundation jobs, engineer-directed over-excavation can mean removing an extra 12 to 18 inches and replacing it with compacted engineered fill.
Older Mesa neighborhoods can have narrow side yards that complicate equipment movement and truck loading. We review access during the site walk and select loading equipment with those restrictions in mind.
Buried boulders and aging landscape beds can leave rock scattered through a renovation area. We match extraction and transport capacity to the material, including decomposed granite, river rock, and larger stone.
Concrete, rebar, asphalt, and vegetation mixed together complicate disposal and can increase fees. Separating material on-site helps preserve recycling options and keeps green waste out of construction-spoil loads.
Mesa's roughly June-through-September monsoon period can bring more than an inch of rain in under an hour. Poor grades and exposed slopes leave active sites vulnerable to pooling and erosion, so drainage work may include diversion berms and silt fencing.
A cleared excavation still needs suitable backfill and compaction. We typically place fill in 6 to 8 inch lifts and test for 90 to 95 percent standard Proctor density where the structure and geotechnical recommendations call for it.
We start by reviewing what needs to move, then connect the loading plan with disposal, delivery, and any related excavation work. Each step accounts for the property's access and what the site needs next.
We inspect the material, access route, and excavation or demolition scope. The site walk also identifies suitable soil for reuse, vegetation to protect, and whether fill or aggregate needs to be delivered.
We assess volume and material density before estimating truck trips. The quote factors in disposal or recycling distance, access constraints, and fees, with larger excavation-scale hauling priced by load and tonnage.
For work that includes grading or trenching, we coordinate underground utility locates through Arizona 811 before digging. Permit coordination goes through the City of Mesa Building Safety Division when the project scope requires it.
Track excavators, skid steers, and demolition attachments handle extraction and loading as the material requires. We separate reusable aggregate, reinforcing steel, and vegetation, and coordinate dust control with water trucks during earthmoving.
We transport loads to the disposal or recycling destination selected for the material. Clean rock and qualifying concrete are directed toward reuse where possible, while green waste travels separately from soil and construction debris.
Where the scope includes backfill or grading, we coordinate delivered fill, compaction, and finish elevations with the project plans. Laser-guided grading can achieve finish grades within a fraction of an inch before a slab, patio, or driveway goes in.
Tell us what material needs to move and whether the project includes excavation, demolition, or fill delivery. We can review the site, calculate loads, and account for access and disposal costs before work begins.
These answers cover hauling costs, truck loads, site access, and related excavation work in Mesa. Your material and site conditions determine the final hauling plan.
Discuss Your Hauling ProjectGeneral dirt and debris hauling in the Mesa area often runs roughly $75 to $375 for smaller jobs, depending on volume, access, and disposal fees. Larger excavation-scale loads are priced by load and tonnage. Rock delivery and spreading typically runs from around $475 for loads up to 5 tons to roughly $950 for 11 to 15 tons including delivery; rock haul-off follows a similar tonnage-based structure. We quote after an on-site walk to account for actual loads and disposal costs.
A dump truck load typically holds 10 to 18 cubic yards, depending on material density, with typical hauling loads weighing roughly 10 to 17 tons. Dense rock, caliche, and clay affect the volume that can be carried within the truck's load capacity. We calculate expected trips for the actual material before mobilizing.
Yes, Mesa Excavation Co. works in central Mesa on pool removals, drainage upgrades, and foundation projects for home additions. Our service area includes established residential neighborhoods and commercial corridors near University Drive, Southern Avenue, Gilbert Road, and Higley Road.
We coordinate start times with property owners in advance and typically schedule residential excavation and hauling during daytime working hours. Nearby homes and site access are part of that discussion, especially in established neighborhoods such as Dobson Ranch and Alta Mesa.
We handle permit coordination with the City of Mesa Building Safety Division when the scope requires it. Pool work, foundation excavation, retention work, and grading are reviewed according to the project. We coordinate the excavation timeline with inspection requirements.
Yes, we coordinate fill dirt and aggregate deliveries through East Valley suppliers. When the project allows, incoming material and outbound hauling can be arranged in the same visit. We also assess whether existing soil can be reused for backfill or grade correction.
Clean rock and qualifying broken concrete can go to regional recycling facilities. We separate reinforcing steel from concrete on-site before recycling. Larger commercial projects may also support crushing and reusing concrete as compactable base for new paving.
Caliche hardpan can slow digging and produce heavy fragments that require suitable extraction and loading equipment. Foundation work may also call for over-excavation and engineered replacement fill, based on the geotechnical engineer's recommendations. We account for those outgoing and incoming materials when planning loads.
We review narrow side yards and other access restrictions during the site walk. Skid steers and track excavators are selected according to the job and the available access. Loading arrangements and truck access are included in the hauling plan before work begins.
Yes, we haul soil from new pool excavation and rubble from demolished pool shells and decking. Standard residential pool basins run 3 to 8 feet deep, with excavation following the pool builder's dimensions, shell thickness, and bond beam elevation. Around Dobson Ranch and Alta Mesa, removal projects can involve older pools from the 1970s and 1980s. Full removal includes the shell and equipment pad, with engineered backfill compacted in lifts.
We coordinate utility locations before grading and trenching. Near existing gas lines, fiber, or other utilities, hydro excavation uses high-pressure water and a vacuum system to expose the area without a mechanical digging bucket. Water, sewer, electrical, and irrigation trenching follow the relevant utility specifications, and backfill is compacted in layers.
Yes, hauling can be planned alongside French drains, storm-drain connections, grading, and retention excavation. Basin volume and elevations come from the civil engineer's calculations, including a 100-year storm design where the project calls for it. We also account for erosion control and access for future maintenance equipment.
Brush, roots, and stumps are separated from soil and rock loads because green waste typically goes to a different disposal facility. We flag protected or salvageable vegetation during the site walk before clearing begins. Palo verde, mesquite, and creosote can leave extensive roots that need excavation as part of preparing the site.